How to Remove Casetify Print from Case Without Damaging It
Trying to remove Casetify print from case can be frustrating if you’re unsure what methods are safe. Casetify cases are known for their bold designs, but many users want a clean, minimalist look without replacing the case. If you’re wondering how to safely eliminate the printed design without ruining the case material, you’re in the right place. This guide outlines safe, effective techniques to remove Casetify print from case using tools you likely already have at home.
Why It’s Difficult to Remove Casetify Print from Case
Casetify prints are applied using UV-cured inks that bond tightly to the case surface. These designs are made to last, which means they’re resistant to water, scratching, and fading. That’s good news—until you want them gone. The trick is to remove Casetify print from case while preserving the integrity of the plastic (usually TPU or polycarbonate).
Method 1: Use Isopropyl Alcohol
One of the safest cleaning agents to use is isopropyl alcohol (at least 70% concentration). It’s effective at breaking down ink without damaging plastic.
Steps:
Apply alcohol to a soft microfiber cloth.
Gently rub the printed area in circles.
Check progress every few minutes.
Rinse and dry the case thoroughly.
This method is safe, affordable, and recommended by cleaning experts such as How-To Geek.
Method 2: Try a Magic Eraser
A Magic Eraser is a melamine sponge that acts as a gentle abrasive. It can lift surface prints without aggressive chemicals.
Instructions:
Dampen the sponge slightly.
Rub gently over the print—don’t scrub harshly.
Dry and inspect the case.
According to The Spruce, Magic Erasers are excellent for removing ink and dirt from hard surfaces.
Method 3: Acetone-Free Nail Polish Remover
If the print is especially stubborn, acetone-free nail polish remover offers a stronger yet safer option than pure acetone.
Steps:
Apply to a cotton swab.
Rub lightly on the printed area.
Wipe with a clean cloth and rinse thoroughly.
Avoid acetone-based removers, as they can damage or cloud plastic—a risk warned about by experts at Good Housekeeping.
What to Avoid
To prevent damaging your phone case:
Do not use sharp tools to scrape off the print.
Avoid acetone or strong solvents.
Don’t overheat the case to loosen the print—it could warp.
Post-Cleaning Tips
Once you’ve successfully removed Casetify print from case, consider polishing the surface using a plastic-safe polish or rubbing compound to restore shine. Also, rinse the case with mild soap and water to remove chemical residues.
Conclusion
If you want to remove Casetify print from case, you don’t have to take risks with harsh chemicals or buy a new one. With the right tools—like isopropyl alcohol, Magic Eraser, or acetone-free polish remover—you can restore your case to a clean, print-free finish. Be gentle, take your time, and always test a small area first.
